Water Plus Quality Utility Products
Water System and Sampling Components Built to Last
Water Plus Corporation designs and manufactures the highest quality water system components in our facility in Pensacola, Florida. From sampling stations to hydrants, all of our components and accessories are built to withstand demanding environments and provide many years of reliable service. Our company offers innovative solutions and knowledgeable customer service from a team of experienced professionals to our valued clients in the water utility industry.
323DIR
Model # 323-DIR
The Model 323-DIR is designed to diffuse and direct the water stream when flushing fire hydrants. The product is constructed of ABS and PVC plastic and has a standard 2-1/2″ NSF fire hydrant thread connection. The Director helps prevent soil erosion when flushing fire hydrants. It is recommended that two directors be used on dual…
Model VB2000B 2” Flushing Hydrant – Sch 80 PVC
Model # VB2000B
The model VB2000B is a 2” below grade flushing hydrant. It is designed to be installed in a standard 5½” valve box making the unit traffic and tamper-proof. The unit is 100% non-corrosive, constructed from schedule 80 PVC, bronze, and stainless steel. The VB2000B operating valve stem is protected from direct ground contact by a…
Model 301W-SS-WPG – Warm Climate – Above Grade Sampling Station with Pressure Gauge
Model # 301W-SS-WPG
The Model 301W-SS-WPG is identical to the Model 301W-SS except that it includes an integrated pressure gauge for checking system pressure. The stainless-steel gauge is mounted below the top ball valve and reads pressure constantly. The stainless-steel pressure gauge has a 2″ diameter face. The pressure gauge is glycerin filled, with 0-160 psi on the…
Model 301W-WPG Above Grade / Cold Climate Sampling Station with Pressure Gauge
Model # 301W-WPG
The Model 301W-WPG is identical to the Model 301W except that it includes an integrated pressure gauge for checking system pressure. The stainless-steel gauge is mounted below the top ball valve and reads pressure constantly. The stainless-steel pressure gauge has a 2″ diameter face. The pressure gauge is glycerin filled, with 0-160 psi on the…
Model 301D-WPG Above Grade / Cold Climate Sampling Station with Pressure Gauge
Model # 301D-WPG
The Model 301D-WPG is identical to the Model 301D except it includes an integrated pressure gauge for checking system pressure. The gauge is mounted below the top ball valve and reads pressure when the primary ball valve is activated and the secondary valve is closed. The stainless-steel gauge has a 2″ diameter face. The gauge…
Model 501-NL ¾” Flushing Hydrant/Sampling Point
Model # 501-NL
The model 501-NL Flush and Sample hydrant provides ¾” flushing capabilities as well as a sampling point. The unit is mounted in the included Model 101 lockable polyethylene enclosure. The unit is 100% non-corrosive, constructed from brass, bronze, stainless steel, and meets all “no lead” requirements. The 501 operating valve stem is protected from direct…
Model 5000-NL 2” Flushing Hydrant/Sampling Point
Model # 5000-NL
The model 5000-NL Flush and Sample hydrant provides both 2” flushing capabilities as well as a ½” sampling tap. The unit will fit in our model 104 lockable polyethylene enclosure for security and aesthetics. The optional enclosure is available in both blue and green colors and is locked by a standard pad lock. The unit…
Model 210G-SVLV Sampling Rod
Model # 210G-SVLV
The Model 210G-SVLV Sampling Rod is designed to be carried by the utility operator to each sampling site for sample collection. The rod is inserted over the male quick connect and while pressing downward, rotates the rod clockwise to screw the rod onto the valve. It requires about 1 to 1-1/2 rotations to open the…
-
Model 950CS-BF "Build Your Own" Sampling Point w Curb Stop & Backflow
Model # 950CS-BF
Ideal For “Build Your Own” Sampling Station with Backflow Protection and Curb Stop The Model 950CS-BF will install on top of a customer-supplied standpipe. The station consists of a quick connect sampling connection, a protective cap, a lock wing curb stop, and a dual check backflow preventer. The construction is all bronze with a ¾”…
Model 1500-1034 One Inch – Below Grade Sampling Station – Meter Box Installation
Model # 1500-1034
The Model 1500-1034 line of below grade sampling stations is a meter re-setter design intended to be installed in an existing meter pit. Simply remove an existing meter, install the Model 1500-1034 “All-In-One” sampling station, then re-install your existing meter. The Model 1500-1034 provides a quick and easy sampling point at an existing meter location. …
-
Model 950CS "Build Your Own" Sampling Point w Curb Stop
Model # 950CS
Ideal For “Build Your Own” Sampling Station with Quick Connect & Curb Stop The Model 950CS will install on top of a customer-supplied standpipe. The station consists of a quick connect sampling connection, a protective cap, and a lock-wing curb stop. The construction is all bronze with a ¾” FNPT inlet connection. Other inlet connections…
-
Model 900L Below Grade Sampling Station – Meter Box Installation – Dead End Lines
Model # 900L
The Model 900L is used for a “dead end” type installation. It may be installed independently in a stand-alone meter box. The unit is supplied with a PVC mounting stake that provides support for the sampling station. The station consists of a dual-check backflow preventer, a quick-connect sampling connection, a protective cap, and a mounting…
-
Model 150G-SS Sampling Rod
Model # 150G-SS
The Model 150 G-SS Sampling Rod is designed to be carried by the utility operator to each sampling site for sample collection. The rod is inserted into the female quick connect and with a downward force, the rod is locked into the female quick connect. The rod may then be flushed and flamed or decontaminated…
Model 301W-SS – Warm Climate – Wet Barrel Design – All Stainless-Steel
Model # 301W-SS
The Model 301W-SS is almost identical to the Model 301W-NL, with the exception that the 301W-SS is ALL STAINLESS-STEEL. This unit is an above grade sampling station for WARM climates. The 301W-SS features all stainless-steel waterway, stainless-steel spigot for flaming and a stainless-steel throttling ball valve. The standard inlet connection is a ¾” FNPT stainless-steel…
Model 1500 Below Grade Sampling Station – "ALL-IN-ONE" – Meter Box Installation
Model # 1500
The Model 1500 line of below grade sampling station is a meter re-setter design intended to be installed in an existing meter pit. Simply remove an existing meter, install the Model 1500 All-In-One sampling station, then re-install your existing meter. The Model 1500 provides a quick and easy sampling point at an existing meter location. …
Model 301D – Above Grade – Cold Climate Sampling Station
Model # 301D
The Model 301D is an above grade sampling station for cold climates. The 301D features all brass and stainless steel waterway, stainless-steel spigot for flaming and a stainless-steel throttling valve. The standard inlet connection is a ¾” CTS pack joint fitting but any inlet fitting may be custom ordered. The unit features a totally enclosed…
-
Model CAS150 Sampling Rod Case
Model # CAS150
PVC case for protecting the Water Plus Model 150G-NL Sampling Rod and Model 210-SVLV Sampling Rod during transportation and storage.
MODEL 301W Warm Climate / Wet Barrel Design
Model # 301W
The Model 301W is an above grade sampling station for WARM climates. The 301W features all brass and stainless-steel waterway, stainless-steel spigot for flaming and a stainless-steel throttling ball valve. The standard inlet connection is a ¾” CTS bronze pack joint fitting however, any inlet fitting may be custom ordered. A totally enclosed PVC housing…
-
Polyethylene Enclosures
Model # 107
Polyethylene enclosures from Water Plus are constructed from rotationally molded polyethylene. Our polyethylene is specifically designed to resist impact, ultraviolet and environmental degradation. All internal hardware is made from stainless steel and/or aluminum, and the mounting stakes are galvanized steel. Enclosure Specifications WP Model # Height Inches Width Inches Depth Inches Overall Height Inches Weight…
Model 2B36A -2" Post Flushing Hydrant – Sch 80 PVC
Model # 2B36A
The model 2B36A is a 2” post flushing hydrant. The unit will fit in our Model 104 enclosure (sold separately) available in blue or green colors. The unit is 100% non-corrosive, constructed from schedule 80 PVC, bronze, and stainless steel. The 2B36A operating valve stem is protected from direct ground contact by a PVC housing….
