Water Plus Quality Utility Products
Water System and Sampling Components Built to Last
Water Plus Corporation designs and manufactures the highest quality water system components in our facility in Pensacola, Florida. From sampling stations to hydrants, all of our components and accessories are built to withstand demanding environments and provide many years of reliable service. Our company offers innovative solutions and knowledgeable customer service from a team of experienced professionals to our valued clients in the water utility industry.
Model VB2000B 2” Flushing Hydrant
Model # VB2000B
The model VB2000B is a 2” below grade flushing hydrant. It is designed to be installed in a standard 5½” valve box making the unit traffic and tamper-proof. The unit is 100% non-corrosive, constructed from schedule 80 PVC, bronze, and stainless steel and is available in both regular and no lead versions. The VB2000B operating…
-
Model 501-NL-xx ¾” Flushing Hydrant/Sampling Point
Model # 501-NL-xx
The model 501-NL Flush and Sample hydrant provides ¾” flushing capabilities as well as a sampling point. The unit is mounted in the included Model 101 lockable polyethylene enclosure. The unit is 100% non-corrosive, constructed from brass, bronze, stainless steel, and meets all “no lead” requirements. The 501 operating valve stem is protected from direct…
-
Model 5000-NL 2” Flushing Hydrant/Sampling Point
Model # 5000-NL
The model 5000 Flush and Sample hydrant provides both 2” flushing capabilities as well as a ½” sampling tap. The unit will fit in our model 104 lockable polyethylene enclosure for security and aesthetics. The unit is 100% non-corrosive, constructed from brass, bronze, stainless steel, schedule 80 PVC, and meets all “no lead” requirements. The…
-
Model 210-SVLV Sampling Rod
Model # 210-SVLV
The Model 210-SVLV Sampling Rod is designed to be carried by the Utility to each sampling site for sample collection. The rod has a female end which, when placed over the male sampling station end and turned clockwise, engages the valve and releases the flow of water. The rod may then be flushed and flamed…
Model 950CS-BF-xx Sampling Station
Model # 950CS-BF-xx
Ideal For “Build Your Own” Sampling Station with Backflow Protection The Model 950CS-BF-xx will install on top of a customer-supplied standpipe. The station consists of a quick connect sampling connection, a protective cap, a lock wing curb stop, and a dual check backflow preventer. The construction is all bronze with a ¾” FNPT inlet connection. …
-
950CS-xx Sampling Station
Model # 950CS-xx
Ideal For “Build Your Own” Sampling Station The Model 950CS will install on top of a customer-supplied standpipe. The station consists of a quick connect sampling connection, a protective cap, and a lock wing curb stop. The construction is all bronze with a ¾” FNPT inlet connection. Other inlet connections are available. Two types of…
-
Model 900L-xx Below Grade Sampling Station
Model # 900L-xx
The Model 900L is used for a “dead end” type installation. It may be installed independently in a stand-alone meter box. The unit is supplied with a PVC mounting stake that provides support for the sampling station. The station consists of a dual-check backflow preventer, a quick-connect sampling connection, a protective cap, and a mounting…
-
Model 1500-1034x-xx Below Grade Sampling Station
Model # 1500-1034x-xx
The Model 1500-1034 below grade sampling station is a meter re-setter design. It is intended to be installed in an existing meter pit in place of the existing meter, and the meter is reinstalled in the new re-setter. The sampling point is on the side of the re-setter. The main advantage of this unit is…
-
150G-NL Sampling Rod
Model # 150G-NL
The Model 150G-NL Sampling Rod is designed to be carried by the utility to each sampling site for sample collection. The rod is inserted into the female quick connect and with a downward force, the rod is locked into the female quick connect. The rod may then be flushed and flamed or decontaminated before sample…
Model 301W-SS Above Grade Sampling Station
The Model 301W sampling station features a highly impact-resistant polyethylene enclosure available in two standard colors: blue and green. Station security is accomplished through a locking hasp that accepts a standard padlock. Additional station security is provided by a stainless steel locking handle located on the throttling valve, which also accepts a standard padlock. The…
-
Model 301D-xx Above Grade Sampling Station
The Model 301D-xx sampling station features a highly impact-resistant polyethylene enclosure available in two standard colors: blue and green. Station security is accomplished through a locking hasp, which accepts a standard padlock. Additional station security is provided by a stainless steel locking handle located on the throttling valve, which also accepts a standard padlock. The…
Model 1500-xxxx-xx Below Grade Sampling Station
Model # 1500-XXXX-XX
The Model 1500 below grade sampling station is a meter resetter design. It is intended to be installed in an existing meter pit in place of the existing meter and the meter is reinstalled in the new re-setter. The sampling point is on the side of the re-setter. The main advantage of this unit is…
-
Model CAS150 Sampling Rod Case
Model # CAS150
PVC case for protecting the Water Plus Model 150G-NL Sampling Rod and Model 210-SVLV Sampling Rod during transportation and storage.
-
Model 301W Above Grade Sampling Station
The Model 301W sampling station features a highly impact-resistant polyethylene enclosure available in two standard colors: blue and green. Station security is accomplished through a locking hasp that accepts a standard padlock. Additional station security is provided by a stainless steel locking handle located on the throttling valve, which also accepts a standard padlock. The…
-
Polyethylene Enclosures
Model # 107
Polyethylene enclosures from Water Plus are constructed from rotationally molded polyethylene. Our polyethylene is specifically designed to resist impact, ultraviolet and environmental degradation. All internal hardware is made from stainless steel and/or aluminum, and the mounting stakes are galvanized steel. Enclosure Specifications WP Model # Height Inches Width Inches Depth Inches Overall Height Inches Weight…
-
2" Post Flushing Hydrant
Model # 2B36A
The model 2B36A is a 2″ post flushing hydrant. This unit will fit in our Model 104 enclosure if desired. The unit is 100% non-corrosive, constructed from schedule 80 PVC, bronze, and stainless steel and is available in both regular and no lead versions. The 2B36A operating valve stem is protected from direct ground contact…
